In the second blog of the series, we will be discussing UV Coating. UV Coating finish: UV Coating is a lacquer that is applied to a book cover with an offset press, providing a very high gloss finish. In order to have a UV Coating finish the entire cover must be printed offset. It is applied as a liquid as a flood (covers whole surface) and then dries clear. It effectively protects against sun fading , and very minimally against general wear and tear of a book. You are likely to get frayed corners, and to eventually experiencing cracking with this type of coating. If you want your cover to be embossed or debossed, this is a fantastic finish options for you. It is probably the best option. The UV floods into the ridges and ripples covering all nooks and cranny’s of the surface, just like varnish, but it provides a stronger, better finish. UV Coat is only available in a high gloss finish. Typically only one flood of UV is necessary. As always, offset cover printing is an expensive option if you are not doing over 1000 books, and UV Coat is not available through all offset printers. Be sure to confirm that a printer actually offers UV and not just multiple coats of gloss varnish. UV Coat can be used as a coating for any type of book, including litho-wrapped books. Next week we'll discuss varnish coating.